Ultrak CCU-100HD Bedienungsanleitung PDF herunterladen (Seite 81)

PROGRAMMING MULTICALLS

4-13

1. Enter C in the FUN field.

2. Enter the monitor number (1-32) in the NUM field.

3. Enter the camera number (1-128) in the CAM field.

4. Enter a dwell time (00-99 seconds) in the DWELL field.

Dwell time is the amount of time you want the CCU to wait before it

performs the next step in the MultiCall. A "00" dwell time tells the

CCU to perform the functions at the same time. A "15" second

dwell time means that the CCU will wait 15 seconds before

performing the next step in the MultiCall.

5. Enter another function or press Enter to end programming. If you

pressed Enter, press S to save programming or press Esc to end

programming without saving.

CALL A CAMERA TO AN ALARM MONITOR (AM) OR ALARM VCR (AR)

NOTE

These functions must be the first entries in the

MultiCall. All dwell times before the last AM or

AR must be zero.

If the MultiCall is to be assigned to an alarm, the video from the camera

in alarm can be called to an alarm monitor (AM) and/or an alarm VCR

(AR). See paragraph 4.5 for setting up alarm monitors and alarm VCRs.

To call the camera up to both an alarm monitor and an alarm VCR, you

must enter them as the first two steps in the MultiCall.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 153 154

Keine Kommentare

Ultrak CCU-100HD Bedienungsanleitung Seite 81